Millimeter-scale magnetic implants paired with a fully integrated wearable device for wireless biophysical and biochemical sensing.

Implantable sensors can directly interface with various organs for precise evaluation of health status. However, extracting signals from such sensors mainly requires transcutaneous wires, integrated circuit chips, or cumbersome readout equipment, which increases the risks of infection, reduces biocompatibility, or limits portability. Here, we develop a set of millimeter-scale, chip-less, and battery-less magnetic implants paired with a fully integrated wearable device for measuring biophysical and biochemical signals. The wearable device can induce a large amplitude damped vibration of the magnetic implants and capture their subsequent motions wirelessly. These motions reflect the biophysical conditions surrounding the implants and the concentration of a specific biochemical depending on the surface modification. Experiments in rat models demonstrate the capabilities of measuring cerebrospinal fluid (CSF) viscosity, intracranial pressure, and CSF glucose levels. This miniaturized system opens the possibility for continuous, wireless monitoring of a wide range of biophysical and biochemical conditions within the living organism.

Multilayer Ti3 C2 -CNTs-Au Loaded with Cyclodextrin-MOF for Enhanced Selective Detection of Rutin.

In this work, multi-layer Ti3 C2 - carbon nanotubes - gold nanoparticles (Ti3 C2 -CNTs-Au) and cyclodextrin metal-organic framework - carbon nanotubes (CD-MOF-CNTs) have been prepared by in situ growth method and used to construct the ultra-sensitive rutin electrochemical sensor for the first time. Among them, the large number of metal active sites of Ti3 C2 , the high electron transfer efficiency of CNTS, and the good catalytic properties of AuNPs significantly enhance the electrochemical properties of the composite carbon nanomaterials. Interestingly, CD-MOF has a unique host-guest recognition and a large number of cavities, molecular gaps, and surface reactive groups, which gives the composite outstanding accumulation properties and selectivity for rutin. Under the optimized conditions, the constructed novel sensor has satisfactory detection performance for rutin in the range of 2 × 10-9 to 8 × 10-7  M with a limit of detection of 6.5 × 10-10  M. In addition, the sensor exhibits amazing anti-interference performance against rutin in some flavonoid compounds and can be used to test natural plant samples (buckwheat, Cymbopogon distans, and flos sophorae immaturus). This work has promising applications in the field of environmental and food analysis, and exploring new directions for the application of Mxene-based composites.

Incidence, clinical features, and survival outcomes of primary malignant lacrimal gland tumors: A population-based analysis.

BACKGROUND: Studies on the epidemiological information and prognosis of primary malignant lacrimal gland tumors (MLGTs) are rare for its low occurrence. The goal of our research was to investigate the epidemiological characteristics and survival outcomes of patients with MLGTs. METHODS: Incidence and demographic information of patients with MLGTs were collected from the Surveillance, Epidemiology, and End Results (SEER) database. To identify independent prognostic factors for disease-specific survival (DSS) and overall survival (OS), univariate and multivariate Cox regression analysis were performed. RESULTS: The overall incidence of primary MLGTs from 1975 to 2020 was 0.413/1,000,000 (according to the 2000 American standard population), with a steadily increasing incidence over years. A total of 964 patients with primary MLGTs were diagnosed, with an average age of 59.3 years. Of these, 53.2% were aged ≥60 years, 57.4% were female, and 77.1% were whites. Multivariate Cox regression analysis demonstrated that year of diagnosis, age, sex, histological type, SEER stage, surgery, and chemotherapy were independent prognostic factors of DSS or OS. CONCLUSIONS: Although primary MLGT is rare, its incidence has steadily increased in the past 46 years, and surgery was related to a better prognosis.

The effect of octenyl succinic anhydride-modified chitosan coating on DHA-loaded nanoemulsions: Physichemical stability and in vitro digestibility.

Octenyl succinic anhydride-modified chitosan (OSA-CS) was synthesized and applied as a coating material to enhance the stability of docosahexaenoic acid (DHA)-loaded nanoemulsion. Due to the presence of the positively charged OSA-CS coating, the nanoemulsion exhibited a high positive zeta potential and two different layers. Compared with natural CS-coated nanoemulsion, OSA-CS-coated nanoemulsion showed improved storage stability (physical and chemical stability) and stability against environmental stresses (ionic strengths, temperatures and pH). Besides, OSA-CS-coated nanoemulsion protected encapsulated DHA from simulated gastric fluid damage better than that of natural CS-coated nanoemulsion, suggesting that OSA-CS-coated nanoemulsion had the potential to deliver more DHA into the small intestine. In conclusion, based on the comparison of two coating materials, natural chitosan and OSA-CS, it was found that the encapsulated nutrient was better protected by the OSA-CS coating. Such a finding will provide insights to broaden the application of modified chitosan in food delivery systems.

Characterization and Potential Action Mode Divergences of Homologous ACO1 Genes during the Organ Development and Ripening Process between Non-Climacteric Grape and Climacteric Peach.

Ethylene is one crucial phytohormone modulating plants' organ development and ripening process, especially in fruits, but its action modes and discrepancies in non-climacteric grape and climacteric peach in these processes remain elusive. This work is focused on the action mode divergences of ethylene during the modulation of the organ development and ripening process in climacteric/non-climacteric plants. We characterized the key enzyme genes in the ethylene synthesis pathway, VvACO1 and PpACO1, and uncovered that their sequence structures are highly conserved, although their promoters exhibit important divergences in the numbers and types of the cis-elements responsive to hormones, implying various responses to hormone signals. Subsequently, we found the two have similar expression modes in vegetative organ development but inverse patterns in reproductive ones, especially in fruits. Then, VvACO1 and PpACO1 were further validated in promoting fruit ripening functions through their transient over-expression/RNAi-expression in tomatoes, of which the former possesses a weaker role than the latter in the fruit ripening process. Our findings illuminated the divergence in the action patterns and function traits of the key VvACO1/PpACO1 genes in the tissue development of climacteric/non-climacteric plants, and they have implications for further gaining insight into the interaction mechanism of ethylene signaling during the modulation of the organ development and ripening process in climacteric/non-climacteric plants.

Circ_0082878 contributes to prostate cancer progression via the miR-455-3p/WTAP axis.

Circ_0082878 has been found to be strongly expressed in prostate cancer (PCa). However, its roles and potential mechanism in PCa have not been investigated. This study aims to clarify it. RNase R digestion method was adopted for verifying the circular structure of circ_0082878. RT-qPCR assay is aimed to detect the expressions of circ_0082878, miR-455-3p and WTAP in PCa tissues and cells. For identifying cell proliferation, migration and invasion abilities, CCK-8 and transwell assay were used. To show the correlation between miR-455-3p and WTAP or circ_0082878, the luciferase reporter gene, RNA RIP and RNA pull-down experiments were employed. We employed western blot to detect protein level of WTAP. In addition, the impact of circ_0082878 on PCa cells in vivo was also studied. It was found that circ_0082878 and WTAP were highly expressed in PCa tissues and cells, whereas miR-455-3p was lowly expressed. Inhibition of circ_0082878 restrained the growth of PCa in vitro and in vivo. Regarding mechanism, miR-455-3p was the target of circ_0082878, and WTAP was the target of miR-455-3p. Circ_0082878 could downregulate the level of miR-455-3p, and inhibiting of miR-455-3p expression could partially eliminate the inhibitory impact of low expression of circ_0082878 on the proliferation and migration of PCa cells. Additionally, over-expression of miR-455-3p resulted in the reduced level of WTAP, and WTAP over-expression counteracted the tumor suppressive impact of miR-455-3p in PCa cells. Moreover, the obtained findings indicated that circ_0082878 may exert tumor-promoting activity in PCa via sponging miR-455-3p and then upregulating WTAP. This indicates that the circ_0082878/miR-455-3p/WTAP axis can probably become the possible therapeutic target for PCa.

Hard Magnetic Graphene Nanocomposite for Multimodal, Reconfigurable Soft Electronics.

Soft electronics provide effective means for continuous monitoring of a diverse set of biophysical and biochemical signals from the human body. However, the sensitivities, functions, spatial distributions, and many other features of such sensors remain fixed after deployment and cannot be adjusted on demand. Here, laser-induced porous graphene is exploited as the sensing material, and dope it with permanent magnetic particles to create hard magnetic graphene nanocomposite (HMGN) that can self-assemble onto a flexible carrying substrate through magnetic force, in a reversible and reconfigurable manner. A set of soft electronics in HMGN exhibits enhanced performances in the measurements of electrophysiological signals, temperature, and concentrations of metabolites. All these flexible HMGN sensors can adhere to a carrying substrate at any position and in any spatial arrangement, to allow for wearable sensing with customizable sensitivity, modality, and spatial coverage. The HMGN represents a promising material for constructing soft electronics that can be reconfigured for various applications.

Organic carbon, elemental carbon and particulate semivolatile organic compound emissions from a common-rail diesel engine: Insight into effect of fuel injection pressure at different loads.

Effect of fuel injection pressure on organic carbon (OC), elemental carbon (EC) and particulate semivolatile organic compounds (SVOCs), i.e., n-alkanes and polycyclic aromatic hydrocarbons (PAHs), emissions from a common-rail diesel engine was analyzed comprehensively. EC emission rate evidently decreased with increasing injection pressure at low fuel injection pressure ranges (80-120 MPa), while engine load effect on the EC emission was insignificant at high injection pressure ranges (140-160 MPa). The higher fraction of EC2 in the total EC emission appeared at the highest injection pressure ranges (140-160 MPa) under middle and high loads, suggesting the spontaneous carbonization process from soot precursor to ordered soot during the high temperature process. Low injection pressure provided poor combustion condition and caused unburned diesel fuel to volatilize more 2-3 ring PAHs. The percentage of 4-ring PAHs exhibited a rise-then-fall trend with increasing injection pressure, while the maximum percentage of 5-7 ring PAHs appeared at the highest injection pressure ranges (140-160 MPa) under high load condition, suggesting that higher combustion temperature and larger pyrolysis zone under the high injection pressure promoted the formation of lager and more stable PAHs. The fractions of fuel-derived short chain (C16-C21) and oil-derived long chain (C22-C33) in the total n-alkanes exhibited obvious load and injection pressure dependence.

New Quasi-Solid-State Li-SPAN Battery Enhanced by In Situ Thermally Polymerized Gel Polymer Electrolytes.

A lithium-sulfur (Li-S) battery is a promising candidate for an electrochemical energy-storage system. However, for a long time, it suffered from the "shuttle effect" of the intermediate products of soluble polysulfides and safety issues concerning the combustible liquid electrolyte and lithium anode. In this work, sulfide polyacrylonitrile (SPAN) is employed as a solid cycled cathode to resolve the "shuttle effect" fundamentally, a gel polymer electrolyte (GPE) based on poly(ethylene glycol) diacrylate (PEGDA) is matched to the SPAN cathode to minimize the safety concerns, and finally, a quasi-solid-state Li-SPAN battery is combined by an in situ thermal polymerization strategy to improve its adaptability to the existing battery assembly processes. The PEGDA-based GPE achieved at 60 °C for 40 min ensures little damage to the in situ battery, a good electrode-electrolyte interface, a high ionic conductivity of 6.87 × 10-3 S cm-1 at 30 °C, and a wide electrochemical window of 4.53 V. Ultimately, the as-prepared SPAN composite exerts a specific capacity of 1217.3 mAh g-1 after 250 cycles at 0.2 C with a high capacity retention rate of 89.9%. The combination of the SPAN cathode and in situ thermally polymerized PEGDA-based GPE provides a new inspiration for the design of Li-SPAN batteries with both high specific energy and high safety.

Pump-probe-alternating photothermal interferometry for two-component gas sensing.

We demonstrate a high-sensitivity acetylene/methane gas sensor based on hollow-core fiber photothermal interferometry (PTI) with a pump-probe-alternating technique. This technique utilizes two distributed-feedback lasers as pump and probe beams alternatively for two gas components to facilitate photothermal phase modulation and detection through time-division multiplexing. With a 2.5-cm-long hollow-core conjoint-tube fiber, noise-equivalent concentrations of 370 ppb and 130 ppb are demonstrated for methane and acetylene, respectively. Noise characteristics of the PTI system are analyzed and experimentally tested. The proposed technique eliminates the need for an additional laser in the traditional PTI setup, enabling the construction of a sensitive yet more cost-effective multi-gas component detection system.

Effects of combinedintravenous and inhalation anesthesia on immune function and cognitive function in postoperative cirrhotic patients with a background in athletics and fitness

Objective: To evaluate the effects of combined intravenous and inhalation anesthesia on postoperative immune and cognitive function in cirrhotic patients, particularly those with a background in athletics and fitness. Methods: A systematic literature search was conducted in the Cochrane Library, Web of Science, PubMed, ProQuest, and Chinese biomedical literature databases (Wanfang, Weipu, CNKI) for controlled trials assessing combined intravenous and inhalation anesthesia in cirrhotic patients, with an emphasis on those maintaining an athletic or fitness-oriented lifestyle. The literature was analyzed using RevMan 5.3 software, focusing on exploring the heterogeneity of the studies. Results: Nine research papers were included in the meta-analysis, encompassing a total of 775 subjects, including 382 in the control group and 393 in the experimental group. Among these, a significant portion of the subjects were identified as being involved in regular athletic or fitness activities. Eight papers were prospective studies, and one was retrospective. The meta[1]analysis revealed that combined intravenous and inhalation anesthesia significantly increased CD3+, CD4+, and CD8+ levels, and improved the CD4+/CD8+ ratio, demonstrating enhanced immune function. Additionally, cognitive function improvements were noted [OR: 1.45, 95% CI (1.03, 1.87), P<0.00001]. There were also significant improvements in liver function markers ALT and ALB. Funnel plots indicated no publication bias (AU)

Erratum: Circulating Exosomal miR-1-3p from Rats with Myocardial Infarction Plays a Protective Effect on Contrast-Induced Nephropathy via Targeting ATG13 and activating the AKT Signaling Pathway: Erratum.

[This corrects the article DOI: 10.7150/ijbs.55887.].

Soy Protein Isolate-Chitosan Nanoparticle-Stabilized Pickering Emulsions: Stability and In Vitro Digestion for DHA.

The purpose of the study was to investigate the stability and oral delivery of DHA-encapsulated Pickering emulsions stabilized by soy protein isolate-chitosan (SPI-CS) nanoparticles (SPI-CS Pickering emulsions) under various conditions and in the simulated gastrointestinal (GIT) model. The stability of DHA was characterized by the retention rate under storage, ionic strength, and thermal conditions. The oral delivery efficiency was characterized by the retention and release rate of DHA in the GIT model and cell viability and uptake in the Caco-2 model. The results showed that the content of DHA was above 90% in various conditions. The retention rate of DHA in Pickering emulsions containing various nanoparticle concentrations (1.5 and 3.5%) decreased to 80%, while passing through the mouth to the stomach, and DHA was released 26% in 1.5% Pickering emulsions, which was faster than that of 3.5% in the small intestine. After digestion, DHA Pickering emulsions proved to be nontoxic and effectively absorbed by cells. These findings helped to develop a novel delivery system for DHA.

Properties of Allicin-Zein Composite Nanoparticle Gelatin Film and Their Effects on the Quality of Cold, Fresh Beef during Storage.

Allicin is a kind of natural antimicrobial active substance, but its water solubility is poor, and it is easy to degrade. In order to improve the stability and bioavailability of allicin, allicin-zein composite nanoparticles (Al-Ze) were prepared by the combination method of antisolvent precipitation and electrostatic deposition, and their characteristic parameters, such as average particle size, polydispersity index (PDI), and ζ-potential, were analyzed. Then, Al-Ze was used as the delivery carrier for the active substance (allicin), and gelatin with good film-forming properties was selected as the film-forming matrix to prepare Al-Ze gelatin films. The optical properties, mechanical properties, and characterization parameters were used to analyze the prepared composite materials; the results confirmed that Al-Ze gelatin film has good mechanical properties and barrier properties. The prepared film was applied to the storage of cold, fresh beef, and the quality change of beef was monitored at 4 °C. The results showed that Al-Ze gelatin film could effectively delay the quality deterioration of beef. This paper provides a new idea and data support for the application of Al-Ze gelatin film in meat storage and fresh-keeping, and offers new insight for the promotion and application of allicin in the food industry.

Stable Loading of TiO2 Catalysts on the Surface of Metal Substrate for Enhanced Photocatalytic Toluene Oxidation.

To promote the practical application of TiO2 in photocatalytic toluene oxidation, the honeycomb aluminum plates were selected as the metal substrate for the loading of TiO2 powder. Surface-etching treatment was performed and titanium tetrachloride was selected as the binder to strengthen the loading stability. The loading stability and photocatalytic activity of the monolithic catalyst were further investigated, and the optimal surface treatment scheme (acid etching with 15.0 wt.% HNO3 solution for 15 min impregnation) was proposed. Therein, the optimal monolithic catalyst could achieve the loading efficiency of 42.4% and toluene degradation efficiencies of 76.2%. The mechanism for the stable loading of TiO2 was revealed by experiment and DFT calculation. The high surface roughness of metal substrate and the strong chemisorption between TiO2 and TiCl4 accounted for the high loading efficiency and photocatalytic activity. This work provides the pioneering exploration for the practical application of TiO2 catalysts loaded on the surface of metal substrate for VOCs removal, which is of significance for the large-scaled application of photocatalytic technology.

3D-printed tortuous vessels with Photodissociable and morphology-controllable ink.

Acute ischemic stroke (AIS) is a high mortality cerebrovascular disease associated with vessel curvature. However, the relevant mechanism remains unclear due to a lack of appropriate tortuous vascular models to investigate and validate. This study explores the combination of projection-based 3D bioprinting (PBP) with photo-stimulus-responsive techniques to fabricate a sodium alginate (SA)/acrylamide (AAM) hydrogel vascular scaffold capable of bending deformation. The coordination of Fe3+ ions with carboxylate groups in the alginate chains of the vascular scaffold acts as a molecular switch, which can be dissociated through photoreduction to enable the deformation response. Fourier Transform Infrared (FTIR) and X-ray Photoelectron Spectroscopy (XPS) results verified the deformation principle. By subjecting the scaffold to UV light exposure, Fe3+ is reduced to Fe2+ in spatially selected regions, resulting in the release of strain and subsequent deformation. Furthermore, it also controlled the degree and direction of curvature of the vessels. The cell seeding experiment verified that the vascular scaffold showed excellent biocompatibility. Overall, our approach could be used to generate an in vitro model of curved vascular pathology to investigate the pathogenesis and provide new directions for the diagnosis and treatment of vascular diseases in the future.

Promising Natural Medicines for the Treatment of High-Altitude Illness.

Li Li, Lin Lin, Bo Wen, Peng-cheng Zhao, Da-sheng Liu, Guo-ming Pang, Zi-rong Wang, Yong Tan, and Cheng Lu. Promising natural medicines for the treatment of high-altitude illness. High Alt Med Biol. 24:175-185, 2023.-High-altitude illness (HAI) is a dangerous disease characterized by oxidative stress, inflammatory damage and hemodynamic changes in the body that can lead to severe damage to the lungs, heart, and brain. Natural medicines are widely known for their multiple active ingredients and pharmacological effects, which may be important in the treatment of HAI. In this review, we outline the specific types of HAI and the underlying pathological mechanisms and summarize the currently documented natural medicines applied in the treatment of acute mountain sickness and high-altitude cerebral edema, high-altitude pulmonary edema, chronic mountain sickness, and high-altitude pulmonary hypertension. Their sources, types, and medicinal sites are summarized, and their active ingredients, pharmacological effects, related mechanisms, and potential toxicity are discussed. In conclusion, natural medicines, as an acceptable complementary and alternative strategy with fewer side effects and more long-term application, can provide a reference for developing more natural antialtitude sickness medicines in the future and have good application prospects in HAI treatment.

Detection of gallic acid in food using an ultra-sensitive electrochemical sensor based on glass carbon electrode modified by bimetal doped carbon nanopolyhedras.

Gallic acid is widely used as an antioxidant in food because of its good antioxidant function, but excessive intake induces side effects in humans, so it is essential to devise a highly responsive technique for detecting gallic acid. In this work, we synthesized ZIF-67@FePc by the one-pot method. The synthesized material is more stable at high temperatures compared to ZIF-67 and maintains its original morphology during pyrolysis, when iron was introduced as a second metal active site during the synthesis process. Subsequently, Co/FeOX@NC-800 was employed to fabricate a GA sensor on a GCE. The developed sensor exhibited remarkable sensitivity towards GA, featuring a low LOD of 1.30 nM and a linear range spanning from 5 to 4500 nM. The electrochemical sensors we have prepared also showed good selectivity, stability, and reproducibility. It has been successfully employed for detecting GA in actual samples such as apples, grapes, tomatoes, and red wine.